TESTING
Power Transformer
- Capacitance & Tan delta Measurement
- SFRA ( Sweep Frequency Response Analyzer)
- Advanced Three Phase Turns Ratio Measurement
- Winding Resistance Measurement up to 50 A
- Dielectric Frequency Response Analysis
- Demagnetization
- Short-Circuit Impedance / Leakage Reactance
- Frequency Response of Stray Losses
- OLTC Scan / Dynamic Resistance (DRM)
- Vector Group Check
- Cooldown Test
- Power Losses at Low Voltages
Circuit Breakers
- Dynamic Contact Resistance Measurement(DCRM)
- Timing and Bounces of Main & PIR Contacts
- Static Contact Resistance Measurement
- Coil Resistance & Current Measurement
- Mechanism Travel Measurement
- SF6 Dew Point, Purity and SO2 Measurement
- SF6 Gas Refilling
- Breaker-function (Tripping & Closing)
- Breaker-Overhauling
- VCB/ACB Maintenance, Servicing and Health Assessment
Instrument Transformers
- C & Tan Delta Measurement – Power/dissipation factor and capacitance measurements are performed to investigate the insulation of CTs.
- Ratio and phase accuracy
- Secondary Winding resistance measurement
- Excitation characteristics (knee points)
- Polarity Deflection
- Burden impedance measurement
- Secondary Injection Up to 500 Amp
- Insulation Resistance measurement
Protection Panels
- Design of Panels
- Relay Testing with Three Phase and Single Phase Instrument ( Omicron)
- Relay Co-Ordination With Software
- Scheme and Bus Bar Checking
- Logic Testing
- TroubleShoot Fault and Solution
Battery Capacity Tests
- Battery Constant Volteg
- Battery Impedence
- Battery Run - Down
Earthing Pit
- Earth Resistance
- Earth Voltage
Thermography
- Thermal Imaging
- Cold Imaging
.png)
.png)